Guys Questions:

I am going to be adding a 25/50 drum sander to my shop. I can’t afford a powermatic so it is between the Jet and Laguna Supermax. I went to AWFS this past year to see them in person and Jet was not at the show and Laguna only brought their large tools. I called one of the nationwide woodworking stores that sells both brands and asked the employee which he thought was better and his response was “ they are both great tools, but if you have a problem with either one of them Jet will take care of the problem immediately, and Laguna will eventually take care of it but it will take a while”. Laguna also charges a $199 shipping fee where as Jet does not. I would appreciate any advice on which one you would recommend. I always look forward to listening to the podcast. Keep up the great work gentlemen! Tom

Hello Fellas On my third round of listening to all your episodes. Thanks for all you contribute to the community. I am getting ready to move my shop from the garage to the basement. I want to keep the dust down to a minimum. I was looking at getting a Grizzly T10113 - Universal Overarm Blade Guard for Table Saws. Have you used or this or something similar. It is very pricey do you think it's worth the money. If not do you have any alternatives. Thank you and keep up the good work Korey Griffin, Independence KY

When is a drawer too wide, specifically for under mount slides? I keep seeing these huge kitchen drawers that look to be almost 36-48" wide. How do they account for the large amount of weight that could potential be in these drawers. Do you guys have any experience using the blum tandem stabilization bars? They state they can be used up to 53" but that seems widely wide. How would you go about building drawers that are over 36" wide? Jesse

Huys Question:

Hi Woodshop Life Podcast Team, Thanks for all the great content—new woodworker here (not a cheap hobby by any means and I mostly blame you guys for this), I went in deep with about 50K in tools but so worth it as I love the idea of building things for people that they will have when I'm gone. I'm a Power Engineer by trade, and I learn a ton from the podcast. Quick question: I’m in Sylvan Lake, Alberta (-40C to +35C weather) and store a decent hardwood stockpile (Walnut, Wenge, Maple/Figured Maple, Zebrawood, Rose Woods—kiln-dried from a reputable Calgary seller) in a 14’ x 10’ room in the back of my heated oversized 3-car garage. Winter RH is usually ~22–25% and summer can swing much higher. I could add a small humidifier in the storage room but that's about it. Storage room has air flow, in floor heat and wood is sitting off the concrete stored vertical on ends. Whole home humidity control is hard to achieve in Alberta without creating a lot of condensation on the windows in winter months which is not good. So we just except the cracked bleeding skin during the winter months. Would you leave it alone and accept seasonal humidity movement, or try to hold the storage room around ~35% RH? If you would control it, what’s a practical target range? Part B - Is cutting wood stored at 22% RH a good idea - I assume it will swell so much in the summer months and assume 22% is way to low to store wood long term over a couple years. Thanks for the wicked podcast - I'd love to come on, I'd have so many questions during each show. Thanks! Trenton (Sylvan Lake, AB

I started a stripping project of my redwood door. It’s old old old! So I am trying to be thoughtful of the contours and the soft wood. I need some guidance since the paint is fighting me and Ive kind of hit a wall. Ian

I have another closet door that my kids have forcebly pulled the screws from the hinge. Not sure how to approach fixing the holes for screws other than cutting a chunk out of the door and glueing and sanding a new piece in. Any thoughts would be helpful. Ian

Brians Questions:

My sister and brother-in-law would like to recruit/hire me to install/build built-in bank of drawers and shelves for them for their new home. The only relatable experience I have with this type of woodworking is building a face frame cabinet and constructing some under the bed drawer storage, each of which I have done exactly one time. The remainder of my woodworking experience has involved making small knick-knacks such as cutting boards, boxes, etc. Considering your experience with built-in shelving and closets, I was hoping you could lend me your expertise in regards to the following questions: 1. What's the easiest way to go about coming up with accurate calculations for the amount of materials I'll need? I might need a very dumbed down explanation. 2. How do you price projects like this? Do you estimate the time it will take and give the customer a set price, or do you use a time + materials structure? I want to help my sister do this for significantly less than she would pay someone else, but I also don't want to be committing an undetermined amount of my time for free. Thanks in advance for all your help. Zach Owens

I have a question about Sawstops and the brake cartridge. I recently tripped my brake last night after changing from a Forest Woodworker blade to a Diable blade. Not sure why it happened. They are both 10" blades. Any suggestions for how to prevent this from happening in the future? Mark

Guys Questions:

I've had this question in my mind for a few months now. How do I know when I'm qualified and ready to teach others how to woodwork? For context, I am a teacher by trade, and have only been woodworking for about 2 and a half years. I am single and have no family, so I do have a lot of time to myself. I primarily use hand tools though I occasionally break out my track saw for sheet goods. I don't have any experience with power tools like a table saw, bandsaw, jointer, planer. My dovetails range from "functional-but-ugly" to "decent", I can chop out mortises with chisels, I can joint my edges with my hand plane, and I can get my surfaces to be "flat enough". With all that said, is there a point where you know you can effectively teach others how to woodwork? Down the line, I wouldn't mind being able to teach some hand tool woodworking classes. I do want to hold myself to a high standard and to be able to teach everyone proper technique without seriously hurting themselves. Thanks in advance for your input, Jose

1. Over the past a couple years I have gotten spoiled by building with a bunch of rift sawn white oak veneer, large slabs of walnut where I can cut parts out as I see fit. Now I can't go back to flat sawn boards!! All I see is the glue line, cathedrals that don't match, or kinda do and just a jumble of boards that just kinda go together. Am I doomed to only hunt for the straightest best grain board? How do you guys incorporate flat sawn (cathedrals) and other wildly grain boards into your work? Or are you only trying to select straight grain for table tops, and use flat sawn stuff for lesser seen parts? Jesse

Huys Questions:

My question is about moving my shop. My wife and I are moving from California to Washington - about 800 miles north of us. I'm going to upgrade from a 1 car garage shop to probably twice the space. We're going to hire professional movers but I'm wondering how to prepare and ship certain machines. The ones I think most about are the Sawstop, the Festool Kapex 120, the DeWalt 735 planer, and my Laguna 14" bandsaw also with wheels. The Sawstop has an extension table. Would you remove that or let the professional movers move the fully assembled saw? I would remove the blade and cartridge. How about the Kapex, planer, and Laguna bandsaw? Any special precautions or recommendations there? For my planes and handsaws am thinking lots of bubble wrap and packed into boxes. Would appreciate your thoughts. Thanks for the great show guys! Ron Novato, CA

Hi guys, I am relatively new to the podcast so maybe it has been talked about before, but I had a question about Maloof inspired rocking chairs. Have any of you attempted making a chair with a Maloof inspired design? If so, did you use/purchase a pattern and do you have any recommendations? I have found several patterns out there, but some of them are a bit pricey and I don’t want to commit to a specific pattern without doing my research. I consider myself an intermediate woodworker and this would by far be the most difficult project I have attempted so any advise is appreciated. Zach