Leg Glue Up, Kitchen Drawers, Radial Arm Saw? and MORE!!!

Brians Questions: I am getting ready to build a mission style entertainment center. This project will use what I'm told is arched pedestal legs which was used a lot by Gustav Stickley. I will be gluing up three 5 3/4"x 28" quarter sawn white oak blanks to make the legs. I will then route the curve using a compression bit and template which I made using the Shaper Origin. My question is what are some good methods to ensure there is a tight (almost invisible) line on the glue up of the blanks. The legs are going to be a major feature on this piece and I would hate for the lines to be visible. I've done glue ups for square legs before and have pretty good success although not perfect. I know grain match is a big deal but wanted to pick your guys brains on clamping methods, glue type and anything else you can suggest to ensure success. Yours is the best podcast on the net. Tom Young I recently upgraded from a 9” ryobi bench top bandsaw to a craftsman 10” Floor standing. I’d like to build a mobile base for it. My question is, how tall should the table be? Should it be elbow high? Waste high? Higher ? Lower? For context, I’m mostly a hand tool guy and, although I have a dinky table saw, I don’t use it much, favoring the bandsaw. I’ll do some light resawing and other more detailed work with it. Thanks guys and Guy. Love the show.Jason Guys Questions: I am working on a large kitchen cabinet project and have come across a few questions I thought would make good discussion. Project includes 16 base cabinets, 14 uppers, range hood and a couple of custom spice racks, open shelves etc. Upper will have 14" upper uppers stacked on them with glass fronts. Lowers are almost entirely drawers. Carcasses are about done heading into face frames and drawers. -Drawer box preferences or use cases for solid wood vs plywood with edge banding. I am leaning towards plywood due to number I need (38), being simpler to use prefinished ply then mill down rough cut. But it seems like cheating.....Large Pots and pans drawers 3/4" sides or 5/8" sides? -Drawer box construction when using overlay fronts. I do not have a dovetail jig. I may end up just pocket screwing them which is what I have done in the past but I wanted to add an upscale touch. I tried my domino with Sipo dominoes, pin nailed the box together first and then put two 5x30 dominoes in. To me the hole created was not that tight with the domino, didn't look nice. I see some YouTube experts make it seem easy, any experience or thoughts? Also thought of using drawer lock bit on the new to me shaper I just picked up but no experience yet. (Grizzly 3hp) Thoughts or preferences? Any other thoughts or recommendations when batching out large cabinet projects. Matt Hola Y'all, I have been listening to y'all for a little over a year, and woodworking for two years. Best Podcast on the interwebs! I was recently gifted a used Grizzly Go555 14" 1HP. I have never owned a Bandsaw and I want to use it mainly for resawing. I was told it is working fine, but I prefer to "Trust, but Verify". My questions are: 1. What tune-up/preventive maintenance should I do immediately? 2. What upgrades should I do for resawing hardwood? Thanks so much! Peace, Love, and Sawdust Norris Sebastian Grandad's Workshop Huy's Questions: Hey guys! I am a full-time journeyman carpenter and I work in the commercial sector around the Indianapolis area. Currently working at the new IU Health Hospital downtown. I’ve been doing carpentry professionally for nearly 9 years. Almost half of a year ago, I decided to purchase a 4x4 shapeoko 5 pro and got involved with learning about cnc. As friends and family found out about my new acquired skill, I’ve been asked to make various types of wood related projects-some requiring cnc and some that don’t. I have a decent amount of handheld power tools and jobsite tools I’ve acquired through the years. Thankfully those tools have helped me in completing non-cnc related projects but my problem is the lack of woodworking tools and equipment at my disposal. Many times I’ve turned down projects due to not having the right tools. Other times I’ve taken extra steps to complete tasks, but had I just had the right tool, it could’ve been a breeze. I want to have a nice wood shop in my barn eventually but not sure how to prioritize my wants and needs. Considering trading the cnc to instantly increase my wood shop tool budget and maybe revisiting it in the future. With a focus on increasing my wood working tools and building up my shop—What are some upgrades/ tool trades/ must-have-tools to kickstart my wood shop? What tools should I get rid of? Tools at my current disposal/ 4x4 shapeoko 5 pro, a dw 8-1/4” table saw, dw 735 planer, dw 10” miter saw, Bosch random orbital sander, metabo belt sander , ridgid oscillating spindle sander, central machine drill press, various dw drills/ impacts/ saw zalls/ oscillator/ hammer drill/ jig saw/ circular saw...