It’s show #599 - On today’s show, we’re talking about finding yourself rudderless in woodworking, when to fire a customer, woodworking on an open-sided deck, woodworking topics that have been discussed too much and too little, winter shop strategies, and safety lessons for a maker space

• John needs to shift his product base as the market has dried up.
• Alex has a custom job that is going south and he is trying to figure out whether to bail or continue on.
• Hamilton is working in a covered porch space but with open sides and asks what he should consider with regard to tool maintenance as well as safeguarding his projects.
• Tomasso asks what woodworking topic has been talked to death and perhaps which ones haven't been talked about enough.
• Ed asks about winter strategies in the shop for keeping his tools in working order.
• William manages a maker space and asks about some safety training protocols.

Our questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at woodtalkshow@gmail.com

Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker

Hosted on Acast. See acast.com/privacy for more information.

It’s show #598 - On today’s show, we’re talking about safety lessons for a maker space, strategizing lumber for a workbench, helical heads in benchtop planers, cypress finishing.

Use code WT2025 for 10% off - Exclusions apply, valid until Jan 31st 2026

• Marc is bending and laminating to make the fanciest towel rack, and now has his new True Grip Clamp Pads for sale!
• Matt is cleaning and sterilizing.
• Shannon took his architect training course on the road to California and admired trees.

• Paul teaches Fusion 360 at his local Woodcraft and shares what he likes about it over SketchUp.
• Joel comments on how Europeans make better plywood with a history lesson on wooden fighter planes in WWII.

• Joel wants a planer and wonders if a spiral head is worth it in a benchtop model.
• Von milled a Red Oak log into boards and is now about to build his workbench but asks if there is any particular grain orientation he should consider for the parts as he builds it.
• Jim is building Adirondack chairs from Cypress. He wants them to grey naturally and wonders if he should put any finish on them at all.

In-Store Classes are awesome. You should take some! Check your local store to see what they have going on.

Here’s just a sampling of what’s going on:

Store Events:

• Supreme Bowl Contests – Woburn, MA; Walpole, MA; Richmond, VA; Norfolk, VA; Portsmouth, NH (Separate contests at each store)
• Submit your bowl to be voted on in a variety of categories. Voting ends February 8th (submission dates and categories vary somewhat by location)

Classes:

• Kansas City, KS – Learn Resin Casting – Saturday, January 31st, 9 to 4
• January 30th – DATE NIGHT: WINE & CHEESE, Turn a bottle stopper and cheese plane

Our questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at woodtalkshow@gmail.com

Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker

Hosted on Acast. See acast.com/privacy for more information.

It’s show #596 - On today’s show, we’re recapping some of our favorite things of the year and answering your questions.

Its our last show of the year so we spend some time talking about our challenges, new products, and specifically stuff we got from our sponsor, Woodcraft.

• Shoutout to Hamilton Ward on his birthday. His wife wrote in and asked us to recognize him.
• Ryan's comic display worked out great but he asks about when to prefinish and when to skip it.
• Von likes the bicycle talk, in fact when he listened to our back log he got Peloton bike ads.

• Matt is milling parts for his Guild project table
• Shannon used a power tool to cut up a live edge slab for an architect.
• Marc bought a new bike then lots of NYC pizza.

• Rockville, MD - 10 Ways to Cut Dovetails with Bob Van Dyke -Saturday, November 29 and November 30, 10 AM - 5 PM
• Walpole, MA - Volunteers needed Wooden Toy Truck Build for "Toys-for-Tots" Saturday, December 6, 2025, 9:30 AM - 3 PM

Our questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at woodtalkshow@gmail.com

Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker

Hosted on Acast. See acast.com/privacy for more information.

If you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show.

It’s show #595 - On today’s show, we’re talking about what to do when your workbench sucks, Is wood acclimation BS, and running a lathe backwards.

Congratulations to Matt Croyle who won the tap room cutting board kit.

We also heard from Joe, last months lathe tool giveaway and he does actually have a lathe and has already put his new tools to use.

• Wood Whisperer Guild Save 40% with code BlackFriday40
• BackSide Sandpaper, Wood Whisperer Specials are 20% off!
• Hand Tool School 50% with code HTS50for15; black friday but 15 yr anniversary.
• Matt Cremona - Free shipping on Chair Kits and some discount on everything else

• Matt is milling parts for his Guild project table
• Shannon used a power tool to cut up a live edge slab for an architect.
• Marc bought a new bike then lots of NYC pizza.

• Von asks how much wood actually acclimates over the course of a few weeks and if that is a myth.
• James asks what to do after he built his workbench and then feel inadequate about it after watching hundreds of videos.
• Joe asks why he would run his lathe backwards because his lathe motor runs both ways.

• November 7th and 8th Kreg Demos at every store nationwide.
• November 8 & 9th- Turn for the Troops events nationwide.
• Local Store events: too many to list here this time...wow...Goooo Woodcraft! Check your local store for details

Our questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at woodtalkshow@gmail.com

Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker

Hosted on Acast. See acast.com/privacy for more information.

If you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show.

It’s show #594 - On today’s show, we’re talking about finish for a commercial shelf, removable furniture tops and ripply cuts.

For November Woodcraft is back with another giveaway. This time they are giving away a Tap Room Cutting Board Kit and you can register to win by filling out the form on our website here. We will draw a winner and announce at the end of November.

• Marc finally finished the built-in desk for Nicole.
• Shannon rants about the quitting perception foisted on him by the market normal.
• Matt started work on the breakfast table

• Tom loves his shaper so much he is teaching a class about it at the Alpine Technical Workshops. If you want to learn more about shapers then this is the place.
• Von likes Shannon's philosophy on getting things done and it reminds him of the book "Getting Things Done" by David Allen
• Marc and Matt think how SketchUp handles versioning and authentication is stupid and they complain about it.

• Ryan needs a finish suggestion for a comic book shelf he is building for a local store.
• Dana is building a TV cabinet that is big and heavy and asks about making the top removable yet structural.
• Rick is sawing Walnut logs with his woodworking guild and they are getting ripply cuts despite changing the blade and doing typical bandsaw triage.

• November 7th and 8th Kreg Demos at every store nationwide.
• November 8 & 9th- Turn for the Troops events nationwide.
• Local Store events: too many to list here this time...wow...Goooo Woodcraft! Check your local store for details

Our questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at woodtalkshow@gmail.com

Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

If you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show.

It’s show #591 - On today’s show, we’re talking about first aid kits, why no shapers?, when is enough, enough?, our favorite distractions when we have a creative block, and an alternative for table saw blade height adjustment.

Woodcraft is back with another giveaway for the month of October. This time they are giving away a 5 piece turning tool set and you can register to win by filling out the form on our website here. We will draw a winner and announce at the end of October.

• Marc wasted time flattening a block plane sole.
• Shannon has started holiday turning.
• Matt has started designing a trestle table, specifically the base.

• Dave asks about our first aid kits in our shops.
• Marc's first aid kit
• Quality Tweezers
• Tom has a shaper in his shop and loves it and can't figure out why no one has one or talks about them.
• Erica asks the questions every woodworker asks at some point: how flat is flat enough, how smooth is smooth enough, etc.
• Tom asks what we do when we hit a wall with a project and are ready to throw it out.
• Eduardo wonders if an answer to our table saw height adjustment issue from a previous episode could be solved by a scale placed on the fence. This suggestion fires up Marc and Matt and they decide to launch an entirely new form of table saw that will cost loads more and be less safe.

All stores:

• October 17 and 18th JessEm Demos at every store nationwide.
• October 11th and 12th- Anniversary sales and open houses at the following stores: Baltimore, Virginia Beach, Pittsburgh, Birmingham, Lexington, Clearwater, and Richmond
• October 12th - Virginia Beach: Make a 3D Stairstep Cutting Board with Alex Snodgrass

Our questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at woodtalkshow@gmail.com

Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker

Hosted on Acast. See acast.com/privacy for more information.