"Remote auditing (well, blended auditing) is here and here to stay”...it's all about planning... then taking the initiative... and of course, you've probably heard it from UKAS and loads of other Certification Bodies that, remote auditing is receiving positive feedback - excellent new at the time!

In fact, the remote and or blended audit has led to so many auditor's never actually visiting you - again, brilliant!

This podcast is aimed at those on the receiving end of Certification Body and UKAS “blended audits” of Quality Management Systems - making life easier.

A well prepared Quality Manager will support your auditor to become quick and slick.

Ask your Certification Body auditor for a "pre-audit" check-list of questions with clause by clause auditing timing - this will help you to help them - drive down your Certification costs by simple preparation.

Don't waste time "nattering" online. Keep to the audit plan. Feed you auditor with data and evidence. Ensure that you KPI's make sense - feed the auditor with facts.

We have decided to provide a few suggestions prior to starting your audit. The main one is train the Quality Manager to be the "face of your business"; its all about presentation.

This podcast is based on how to make the “remote audit” a success for those sitting on both side of the table, summarized as follows:

1. Contracts and non-disclosure agreements

2. Technology communication testing

3. Planning, timing and costing

4. Information and data media

5. Scope and duration

6. Culture and environmental perspective

7. Reporting the audit and follow-up

The “remote audit” is a completely different beast to norms of face to face auditing… it must be treated like a new technology… train yourselves on how to “present the case” for your business and quality management system.

Require support? Please contact us at The Assessment Register...
www.assessment-register.co.uk

All the best.

Support the show

When using the term "NPD" or "no performance determined", it means just that. You are issuing a warning to the customer, by way of the declaration, about the limitations of the product e.g. not everything has been specified and or tested.

This is particularly key when you do not have design within your "factory production control" (FPC) scope of supply (and producing the product against the customer supplied product design specification).

Within the Construction Products Regulation [(EU) No 305/2011 also the applicable UK Statutory Instrument] clearly states that the "manufacture" is the one placing the product onto the market, and ultimately the one responsible the integrity of the UKCA Mark as applied.

(EU) No 305/2011 - see Article 2 Clause 19

This basic fact about the one placing the product onto the market, is a key requirement of all UKCA obligations. Consider:

a) BS 1090-1 Table ZA.3 – this is the tasks for the certification (approved) body when they visit you (the enterprise) – to review the FPC only against (clause 6.3 and this limited focus is as legislated within the CPR and may exclude “design” - (EU) No 305/2011 - see Article 2 Clause 26) and with reference to;

b) Annex ZA.1 – the specification for the product as provided from the customer (or if design is within the FPC scope, the internal design requirements); as applicable to the product (and contract specification, as defined), with reference to;

c) Annex B – the certification [approved] body will undertake an initial inspection and on-going inspection of the FPC (as per scope – with reference to Annex B.4.2) – basically, assess the effectiveness of the FPC with consideration to the above 1 and 2; and finally;

d) ZA.3 ## – the certification [approved] body will review the “declaration of performance" UKCA Mark certificate content as issued by the FPC – to include any NPD’s as confirmed within 2 above.

Therefore, the Notified Body is awarding "certification" against the "factory production control" clause of BS 1090-1, 6.3 for the enterprise to issue "declarations of performance" for UKCA Mark (at the point of dispatch from their FPC).

Where the FPC excludes design from the scope as confirmed with the Approved Body, then the legal responsibility for the product specification sits firmly with the customer and or their design experts (AKA the CPR manufacturer in law).

Why are we putting this out there?

So many Approved Bodies are bouncing SME fabrication welding firms into "non-conformances" due to the SME's customer NOT providing the correct information for the product. From customers not providing the EXC level through to bolts and weld test specifications not made clear.

However, in this regard, we recommend to all "non-design" BS 1090 firms to simply state NPD on their UKCA Marking "declarations of performance" (in line with the BS 1090 Annex ZA's). Clearly stating this within the "declaration of performance" to the customer specified requirements as per their drawing specification provided.

As a non-design BS 1090 firm, you cannot be permitted to deviate from the information provided from your customer (without written consent to do so, under for example a concession from the design authority - the customer); should you deviate from the customer contract specification, this would be a breach of contract and you would be liable for any failures.

Approved Bodies should focus on auditing with reference to the primary points of legal reference; the CPR and UKCA Marking, with reference to the scope limitations of the BS 1090 clause 6.3. The BS 1090 has become the focus of attention and not the legal frame-work - for safe product and compliance documentation, such as the agreed product specification for the product.

Support the show

80% OF NCR'S CAN BE DIRECTLY TRACED TO WEAK REVIEW OF CUSTOMER CONTRACTS & TENDERS.

Quality management systems require some basic ingredients to ensure effectiveness. One of the primary ingredients is "contract review" for AS 9100, ISO 9001 and ISO 17025.

Keeping in mind that 80% of an organizations poor performance, can be traced to a poorly controlled "contract review" process. Due to the lack of? Yes, you've guessed it, due to the lack of "review of the contract detail".

Or not reviewing the contract terms and conditions for technical and quality requirements and commercial obligations.

Customer complaints, supplier issues, in-process reworking, late delivery, etc. can almost all be attributed to those involved with contract review. Those unfortunate individuals that are either under pressure, under resourced or under qualified for the task.

This podcast will simply highlight the requirements for the management and administration of sales order processing and effective quality control of your customer needs.

www.assessment-register.co.uk

Support the show

King Arthur and the Sword in the Stone - If you are from the village of Ilton in Somerset, England then, it is very likely that I already know you or the people you know.

I decided to write about Wadhams Castle AKA Merryfield House and the historical Knightly deeds of King Arthur. Also acknowledging the philanthropist attributes of the Wadham family during their time at Wadhams Castle. What else? Simply, I wanted to put Wadhams Castle back on the English map - it is a great place and it's where King Arthur became King of Wessex and then England.

What the historians say. Merryfield Castle is a moated site and its associated fishponds at Ilton are recommended for scheduling for the following principal reasons:

Survival: as a well-preserved example of a medieval moated site that is unencumbered by later development;

Potential: the survival of below-ground archaeology relating to the layout and type of structures that formerly occupied the moated island and waterlogged deposits have the potential to enhance our understanding of the construction, occupation and abandonment of the moated site;

Documentation: the existence of documentary evidence contributes to our knowledge of the site and its significance;

Historic interest: for its association since the C14 with the Wadhams, a wealthy and philanthropic family who founded Wadham College, Oxford in in the early C17.

For your FREE Kindle e-book go to - https://www.amazon.co.uk/s?k=the+moated+stone&i=stripbooks&ref=nb_sb_noss_1

Support the show

With fear of stating the obvious, this podcast is about "calibration control" for general mechanical engineering and precision machining.

The podcast includes hints and tips for the avoidance of audit non-conformances.

Most organizations will have very good calibration control internally, although sometimes fail to manage external calibration service providers and accredited calibration laboratories.

This podcast is a gentle reminder not to assume calibration is compliant in the hands of external service providers... Look at the scope of your calibration service providers accreditation schedule.

Consider your customer contract obligations and requirements and then double check this against the calibration laboratory.

Some will claim ISO 9001 certification for the calibration service; this is the management of the calibration service and not always the control of the calibration itself.

The use of a UKAS accredited calibration laboratory is the safe bet (or other ISO 17025 accredited laboratory), but always confirm the scope of your chosen laboratory.

An Excellent Opportunity to Attend our 4 Session Remote AS 9100 & ISO 9001 Training Program for aerospace, to include Internal Audit methodologies and best practice and the AS 91## family of support Standards, to include ISO 9001 of course. The course is also supported by a "free to download" Kindle or booklet to purchase as a point of reference guide. Go to Amazon and "search books" The Internal Quality Auditor - The Next Generation eBook

Listen to this podcast for all you need to know about attending this remote training program. We describe the 4 sessions, expertly designed as follows:

1. AS 9100 Awareness & Implementation
2. AS 9100 Technical Series & Areas Discussion
3. AS 9100 Internal Auditor Training
4. AS 9100 Case Studies & Workshops

Course History

Our “remote training” course – is all about AS 9100 and aerospace quality management "best practice" and "quality management" audit methodologies. Originally developed for our consultancy project clients, based on the need for practical understanding and not just talking about AS 9100 clause headings, but actual explanation about technical implementation in context with the organizational requirements.

The course is divided over 4 x sessions, throughout 1 x day.

Unlike many other AS 9100 training courses, our “remote training” course program is delivered by true practitioners with an unchallenged reputation of ensuring Certification success.

The course program provides a unique blend of practical implementation advice against those awkward clauses of the AS 9100 – providing proven examples when required.

We understand what the Certification Body requires from you to achieve AS 9100. Therefore, our primary focus is ensuring you successful development and implementation, through to compliance. We pride ourselves on delivering expertise for both improvement and technical compliance – we stand or fall by the quality of our AS 9100 training.

Course Objectives

Our “remote training” course program is dynamic and encourages complete delegate participation. All delegates are asked to provide us with a series of questions in advance of attending the course, relevant to specific needs to ensure we balance the course to the group – and answer your specific questions.

Our “remote training” is aimed at those already familiar with the requirements of "quality management systems". In addition, fir those seeking to have a better understanding of the aerospace and defence sector requirements - all your questions will be answered with a “no-nonsense” example to support compliance.

Course Tutor

With over 30 years of "quality management" and "conformity assessment" experience, within the private sector and government institutions. Successfully completed over 600 legal metrology, standards, testing and quality assurance projects within the UK and internationally. From AS 9100 and ISO 9001 to ISO 17025 and AQAP to CAA JAR 145, from engineering apprentice, compliance manager to senior civil servant... to include sector scheme development for trading standards... rest assured, our course tutor is a true practitioner that won't disappoint.

After listening to this podcast, contact and book your place. We can also deliver this training course program one-on-one remotely or at your organization if preferred.

Email: info@assessment-register.co.uk

Hopefully both... a cool drink, a hot sunny beach, waves crashing, and yes, an ISO 9001 podcast - living the dream or what!!

Now is the right time to consider taking your business to the next level. Up date your current ISO 9001 or go for the AS 9100 certification.

The positive re-structure and re-launch of your business and what better management tool – ISO9001. In just 4 days, The Assessment Register team can quickly make you ready and manage your formal certification! The foundation of continuous improvement.

Yes, it is time to land the mother ship – the mother of all quality management system Standards – ISO 9001 is the cornerstone for competitive advantage and business improvement.

This podcast is a simple reminder about the benefits of ISO 9001 and related certification.

• Enhanced reputation
• Business improvement
• Commercial awareness
• Risk mitigation
• Resource planning
• Sustained development
• Quality assurance

…and above all, putting your business on the tender to bit for contracts.

Remind yourself of the benefits at your leisure – listen to the podcast and contact The Assessment Register for more information – www.assessment-register.co.uk

Whether you're new to internal quality system auditing, or an old hand, listen and learn from our "podcast" and at the same time refer to our "free" kindle eBook from Amazon.

Be prepared to present you case for internal auditing and reporting.

Our internal auditor training is divided into 5 easy reference sessions:

1. Developing audit concepts - why, where and when to audit
2. The auditor - character and how to select the best auditor
3. The audit - where to look, what to audit and who to ask
4. Auditor skills - getting it right, with the correct information
5. Reporting the audit - presenting the performance improvement case to management

… with the primary objective of performance improvement and contract compliance.
… you'll know as much as the Certification Body at the close of the podcast.

For your FREE kindle e-book (copy into your browser) - https://www.amazon.co.uk/INTERNAL-AUDITOR-NEXT-GENERATION-19011-ebook/dp/B078R8ZFMG/ref=sr_1_1?dchild=1&keywords=the+internal+auditor+david+burns&qid=1588085929&sr=8-1

The information contained in this publication is designed in such a way as to give knowledge and guidance to Quality Managers and Internal Auditors. The methodologies applied throughout this booklet are well proven and will deliver performance improvement – and your reputation as an expert Internal Auditor.